Job Name - Kyocera ECOSYS M2030dn Operation Manual

Printer:
1
*********************
Emulation Set.
2
EcoPrint
3
Override A4/LTR
CR Action:
1 *CR Only
*********************
2
LF and CR
3
Ignore CR

Job Name

Set whether the job name set in the printer driver is displayed.
Use the procedure below to specify a Job Name.
Sys. Menu/Count.:a b
5
Common Settings
6
CoPy
7
*********************
Printer
Printer:
1
*********************
Emulation Set.
2
EcoPrint
3
Override A4/LTR
Job Name.:
********************* 1 *Off
2
On
2
a b
[ Exit ]
3
4
a b
5
6
1
[ Exit ]
2
a b
[ Exit ]
3
4
a b
5
8-94
Press the OK key. The Printer menu appears.
Press the  or  key to select [CR Action].
Press the OK key.
Press the  or  key to select [CR Only], [LF and CR]
or [Ignore CR].
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
Press the OK key. The Printer menu appears.
Press the  or  key to select [Job Name].
Press the OK key. Job Name appears.
Press the  or  key to select [Off] or [On].
Default Setting (System Menu)