Emergency Stop Switch Inspection - Suzuki GF60A Service Manual

Neutral switch on engine side
1) Disconnect the neutral switch lead wire connector.
2) Check continuity / infinity between the Yellow / Green
and Brown lead wires while operating the remo-con
handle.
Special tool
(A): 09930–99320 (Digital tester)
Neutral switch function
Shift position
Neutral
Forward
Reverse
2
1. Clutch lever
2. Neutral switch
"A": Neutral
Y/G
Br
Tester indicates
Continuity
Infinity
Infinity
1
"A"
"B" "C"
IAJ611190005-01
"B": Forward
"C": Reverse
(A)
I9J011190047-03
3) If out of specification:
• 1st:
Check the remo-con cable adjustment, readjust if
necessary.
• 2nd:
Check the wire harnesses for open and short
circuits.
If the wire harnesses are in good condition,
replace the neutral switch and recheck.
NOTE
After installing the neutral switch, check for
correct function by operating the remo-con
handle.

Emergency Stop Switch Inspection

Refer to "Emergency Stop Switch Inspection" in Section
1C (Page 1C-15).
Starting System: 1I-18
ZAJ6111906009