Location Of Sensor And Switch - Suzuki GF60A Service Manual

1C-7 Engine Electrical Devices:

Location of Sensor and Switch

Refer to "Wiring Harness Routing Diagram" in Section 4A (Page 4A-4).
Resistance Check
Special tool
: 09930–99320 (Digital tester)
Tester knob indication
Resistance (Ω)
NOTE
Make sure ignition switch is always OFF when measuring resistance.
1) Turn ignition switch OFF.
2) Disconnect battery cables from battery.
3) Disconnect wire harness connector from ECM.
4) Connect the tester probes to terminal (wire harness side) and measure resistance according to the "Resistance
Table" (Page 1C-7).
37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70 71 72
3
1. Engine main wire harness
Resistance Table
Circuit
CKP sensor
Fuel injector No. 1
Fuel injector No. 2
Fuel injector No. 3
IAC Valve #1
IAC Valve #2
IAC Valve #3
IAC Valve #4
IAT sensor
Cylinder temperature sensor
Component Location
Service Instructions
1
2. Black connector
Terminal for Tester Probe
Connection
50 (R/B) to 25 (B/W)
45 (O/B) to 12 (Gr)
71 (B/Br) to 12 (Gr)
47 (R/W) to 12 (Gr)
60 (W/B) to 12 (Gr)
70 (R/Y) to 12 (Gr)
58 (R/G) to 12 (Gr)
48 (W/Bl) to 12 (Gr)
8 (Lg/B) to 25 (B/W)
20 (Lg/W) to 25 (B/W)
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36
3. Gray connector
Standard Resistance (at 20 °C)
168 – 252 Ω
10 – 14 Ω
25 – 34 Ω
0 °C (32 °F): 5.3 – 6.6 kΩ
25 °C (77 °F): 1.8 – 2.3 kΩ
50 °C (122 °F): 0.73 – 0.96 kΩ
75 °C (135 °F): 0.33 – 0.45 kΩ
(Thermistor characteristic)
ZAJ6111303001
ZAJ6111306001
2
I9J011130006-04