General Information - Suzuki GF60A Service Manual

0A-1 General Information:

General Information

General Information
Symbols
Listed in the table below are the symbols indicating instructions and other important information necessary for proper
servicing.
Please note the definition for each symbol. You will find these symbols used throughout this manual.
Refer back to this table if you are not sure of any symbol (s) meanings.
Symbol
Torque control required.
Data beside it indicates specified torque.
Apply oil.
Use engine oil unless otherwise specified.
Apply molybdenum oil solution.
(Mixture of engine oil and SUZUKl MOLY PASTE in a ratio of 1 : 1)
Apply SUZUKI Outboard Motor Gear Oil.
Apply SUZUKI Super Grease A.
Apply SUZUKI Moly Paste.
99000-25140
Apply SUZUKI Water Resistant Grease.
Apply SUZUKI Bond 1207B.
Apply SUZUKI Silicone Seal.
Apply SUZUKI Thread Lock 1342.
Apply SUZUKI Thread Lock Super 1333B.
Use special tool.
Do not reuse.
Note on reassembly.
Use peak voltmeter Stevens CD-77.
General Description
Definition
ZAJ6110101001