Oil Pressure Switch Inspection; Oil Strainer Removal And Installation; Oil Strainer Related Parts Inspection - Suzuki GF60A Service Manual

Oil Pressure Switch Inspection

NOTE
Before checking the oil pressure switch,
make sure the engine oil pressure is within
specification.
1) Remove the ring gear cover.
Refer to "Ring Gear Cover Removal and Installation"
in Section 1D (Page 1D-2).
2) Remove the blue lead wire (1) from oil pressure
switch (2).
2
WARNING
!
When the engine is running, keep your
hands, hair, clothing, etc., away from the
engine.
3) Check the continuity between the switch terminal
and engine body ground.
Special tool
: 09930–99320 (Digital tester)
Tester knob indication
Continuity ( )
Oil pressure switch continuity
Engine running: Infinity
Engine stopped: Continuity
4) If measurement exceeds specification, replace oil
pressure switch.
5) Reinstall parts removed earlier.
ZAJ6111506005
1
IAJ611150015-01
I9J011150003-01
Power Unit Lubrication:

Oil Strainer Removal and Installation

Removal
Refer to "Engine Holder / Oil Pan / Driveshaft Housing /
Mounts Disassembly" in Section 2A (Page 2A-13).
Installation
Refer to "Engine Holder / Oil Pan / Driveshaft Housing /
Mounts Assembly" in Section 2A (Page 2A-15).

Oil Strainer Related Parts Inspection

• Inspect oil strainer. Replace strainer if cracked,
damaged or other abnormal conditions.
If clog or obstruction, clean oil strainer.
• Check condition of O-ring. Replace O-ring if nicked,
cut, worn or other abnormal condition.
1E-6
ZAJ6111506006
ZAJ6111506007
IAJ611150016-01