Do you have a question about the DF9,9 and is the answer not in the manual?
Questions and answers
John
March 29, 2025
How to remove driveshaft from suzuki 9.9
1 comments:
Mr. Anderson
March 29, 2025
To remove the driveshaft from a Suzuki DF9.9, follow these summarized steps based on the manual:
1. Remove the oil pan from the driveshaft housing. 2. Remove four bolts and take off the upper mounts. 3. Remove four bolts and take off the lower mount. 4. Remove the bolt securing the water tube and then remove the water tube. 5. Inspect components such as the oil seal, mounts, and driveshaft housing for damage and replace if needed.
Need help?
Do you have a question about the DF9,9 and is the answer not in the manual?
Questions and answers
How to remove driveshaft from suzuki 9.9
To remove the driveshaft from a Suzuki DF9.9, follow these summarized steps based on the manual:
1. Remove the oil pan from the driveshaft housing.
2. Remove four bolts and take off the upper mounts.
3. Remove four bolts and take off the lower mount.
4. Remove the bolt securing the water tube and then remove the water tube.
5. Inspect components such as the oil seal, mounts, and driveshaft housing for damage and replace if needed.
Reassembly is done in reverse order.
This answer is automatically generated