Fuel Injector Removal And Installation - Suzuki GF60A Service Manual

1G-24 Fuel System:

Fuel Injector Removal and Installation

Removal
1) Relieve the fuel pressure in the fuel feed line
according to "Fuel Pressure Relief Procedure".
Refer to "Fuel Pressure Relief Procedure" (Page 1G-
15).
2) Loosen the clamp and place a large cloth over the
end of the fuel feed hose (1).
Slowly pull the fuel feed hose from the fuel delivery
pipe.
Drain any excess fuel in the hose into a small
container.
1
3) Disconnect the three fuel injector connectors (2).
2
ZAJ6111706013
IAJ611170054-01
2
IAJ611170055-01
4) Remove the two bolts (3) and the fuel delivery pipe
(4) (with the fuel injectors).
CAUTION
A small amount of fuel may be released when
the fuel injector is removed from delivery
pipe.
Place a shop cloth under the fuel injector
before removal to absorb any fuel released.
Dispose of the fuel soaked cloth in
appropriate container.
5) Remove the lead wire clamp (5) from delivery pipe
by releasing clamps' lock.
6) Remove each injector (6) from the delivery pipe.
3
4
3
IAJ611170056-01
5
IAJ611170057-01
6
IAJ611170058-01