Timing Chain, Chain Tensioner And Camshaft Sprockets Inspection; Camshaft, Tappet And Shim Removal And Installation - Suzuki GF60A Service Manual

1D-26 Power Unit Mechanical:
Timing Chain, Chain Tensioner and Camshaft
Sprockets Inspection
NOTE
If any component is worn excessively,
cracked, defective or damaged in any way, it
must be replaced.
Timing Chain
Inspect timing chain for wear or damage.
If excessive wear or other damage is found, replace it.
Tensioner Adjuster
Inspect tensioner adjuster for smooth operation.
Replace if fault is noted.
Check oil delivery passage to tensioner.
1. Latch
2. Tooth surface
ZAJ6111406013
I9J011140181-01
I9J011140182-01
3. Oil passage
Timing Chain Tensioner/Chain Guide
• Check chain tensioner shoe for wear or damage.
If excessive wear or other damage is found, replace it.
• Check chain guide shoe for wear or damage.
If excessive wear or other damage is found, replace it.
Camshaft Timing Sprocket
Check teeth of sprocket for wear or damage.
If excessive wear or other damage is found, replace it.
Camshaft, Tappet and shim Removal and
Installation
Removal
1) Remove the oil pump.
Refer to "Oil Pump Removal and Installation" in
Section 1E (Page 1E-3).
2) Remove the timing chain and chain tensioner.
Refer to "Timing Chain, Chain Tensioner and
Camshaft Sprockets Removal and Installation"
(Page 1D-22).
IAJ611140156-01
IAJ611140157-01
ZAJ6111406014