Oil Pressure Switch - Suzuki DF 25 Service Manual

OIL PRESSURE SWITCH

REMOVAL
Loosen screw and disconnect blue/yellow lead wire from switch.
Remove oil pressure switch from crankcase.
INSTALLATION
Installation is reverse order of removal with special attention to
the following steps.
• Before installing oil pressure switch , wrap screw threads with
sealing tape then tighten switch to specified torque.
NOTE:
Cut off any excess sealing tape from switch threads before in-
stallation .
Oil pressure switch : 13 N . m (1.3 kg-m, 9.5 lb.-ft.)
• Start engine and check oil pressure switch for oil leakage.
Reseal switch if oil leakage is found.
ENGINE CONTROL 3-19
1
1. Sealing tape