Establishing The Start Up Configuration - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER

Establishing the Start Up Configuration

The Command Line Interface (CLI) allows you to administer the USG's start-up
configuration settings.
"
When establishing the start-up configuration for a new installation, you
are connected to the USG via a direct serial connection (you do not
have remote access capability because the USG is not yet configured or
connected to a network). At this point, the CLI is the only management
interface available to you. Once the installation is complete (see
"Installation Workflow" on page
configured, you will have the additional options of managing the USG
remotely from the system's Web Management Interface, an SNMP client
manager of your choice, or a simple Telnet interface.
The start up configuration must be established before connecting the USG to a
customer's network. The "start up" configuration settings include:
Assigning a Login Name and Password –
! ! ! !
manager login user name and password that enables you to administer and
manage the USG securely.
"
User names and passwords are case-sensitive.
Setting the SNMP Parameters –
! ! ! !
Management Protocol) parameters must be established before you can use
an SNMP client (for example, HP OpenView) to manage and monitor the
USG remotely.
Enabling the Logging Options –
! ! ! !
want to create system and AAA (billing) log files, and retrieve error
messages generated by the USG.
Assigning the Network Interface IP Address –
! ! ! !
address that allows administrators and subscribers to see the USG on the
network. Use this address when you need to make a network connection with
the USG.
Assigning the Subscriber Interface IP Address –
! ! ! !
that subscribers will see on the private side of the USG.
Assigning the Subnet Mask –
! ! ! !
addresses that are available on the routed subnet where the USG is located.
Assigning the Default Gateway IP Address –
! ! ! !
router that the USG uses to transmit data to the Internet.
Installing the USG
G ™
ATEWAY
The SNMP (Simple Network
Servers must be assigned and set up if you
The subnet mask defines the number of IP
33) and the system is successfully
You must assign a unique
This is the public IP
This is the IP address
This is the IP address of the
39