Viewing The "Location.txt" File; Creating A "Location.txt" File - Nomadix Universal subscriber gateway User Manual

Viewing the "location.txt" File

You can click on the "View location.txt" link if you want to view the current contents
of the file.

Creating a "location.txt" File

You can create your own "location.txt" file and upload the file to the USG's flash
memory at [IP address]/flash/location.txt.
Use the following format when creating the file:
"C350",100,00:00:00:00:00,1,"conference room"
"C350",200,00:00:00:00:00,0,"penthouse suite"
"C350",300,00:00:00:00:00,2,"basement apartment"
The 4 (four) fields used in the format represent the standard format for port-location
assignments (location, port, modem MAC address for RiverDelta, state, description).
"
All alpha characters (used for locations and descriptions) are case-
sensitive.
– Locations are assigned as an alpha, numeric, or alpha-numeric
Location
! ! ! !
value (unless a PMS interface is used, in which case only numeric values can
be used).
Port – Any number between 1 and 65535.
! ! ! !
State – Possible states are: (0) no charge for using this port-location, (1)
! ! ! !
charge for use, and (2) blocked. If you do not assign a conditional state, the
state is registered as "No Charge" by default.
Description
! ! ! !
118
– Use a meaningful description for the assignment.
U S
NIVERSAL UBSCRIBER
System Administration
G ™
ATEWAY