Updating A Port-Location Assignment - Nomadix Universal subscriber gateway User Manual

Enter a location identifier in the
2.
alpha, numeric, or alpha-numeric value unless a PMS interface is used (see
notes).
#
If you are using a PMS interface, ensure that the "Location" field
consists only of numbers (no alpha characters or symbols).
"
All alpha characters (used for locations and descriptions) are case-
sensitive.
In the field, enter the port (the VLAN ID when using 802.1Q 2-way).
3. Port
In the
4. Description
assignment.
You must now assign a State for this port-location. Possible states are, No Charge
for using this port-location, Charge for Use, and Blocked. If you do not assign a
conditional state, the state is registered as "No Charge" by default.
Select the conditional state you want to assign to this port-location.
5.
Click on the
6. Add
want to reset all the values to their previous state.

Updating a Port-Location Assignment

The procedure for updating a port-location assignment is similar to adding a port-
location assignment. The difference between the two procedures is how they are
presented to you. For example, if you already have port-locations assigned and you
enter an existing "port" value, each data field that you go through (port, location,
state, and description) displays the value currently assigned to the field.
To update a Port-Location assignment, simply update the fields with new values.
"
If you have updated a port-location assignment, you may want to
change its description to distinguish from the old assignment. Although
the old assignment will no longer exist in the system, a meaningful
description can often be a valuable quick reference guide.
110
Location
field, enter a meaningful description for this port-location
button to save your changes, or click on the
U S
NIVERSAL UBSCRIBER
field. Locations can be assigned as an
Reset
System Administration
G ™
ATEWAY
button if you