Deleting Port-Location Assignments By Port {Delete By Port - Nomadix Universal subscriber gateway User Manual

In the
2. Location
to delete.
"
Locations are case-sensitive.
Click on the
3. Delete
click on the
Reset
state.

Deleting Port-Location Assignments by Port {Delete by Port}

This procedure shows you how to delete a port-location assignment, based on its port.
The USG prompts you to confirm this action before deleting the requested port-
location.
"
If you are unsure which port-locations are currently mapped to the
system, you can view a list at
{List}" on page
From the Web Management Interface, click on
1.
Port.
The Delete Port-Location Assignments by Port screen appears:
In the field, enter the port of the assignment you want to delete.
2. Port
"
The "port" is the VLAN ID (when using 802.1Q 2-way).
Click on the
3. Delete
click on the
Reset
112
field, enter the location of the port-location assignment you want
button to delete the specified port-location assignment, or
button if you want to reset the "location" value to its blank
"Displaying the Port-Location Mappings
119.
button to delete the specified port-location assignment, or
button if you want to reset the "port" value to its blank state.
U S
NIVERSAL UBSCRIBER
, then
Port-Location
System Administration
G ™
ATEWAY
Delete by