Assigning Banners - Nomadix Universal subscriber gateway User Manual

Assigning Banners

From the Subscriber Console (Information and Control Console - ICC) Setup
9.
screen, click on the
The Subscriber Console (Information and Control Console - ICC) Banners Setup
screen appears:
You can display up to 5 (five) banners, but they must be defined here. Banners
10.
require all the same parameters that "buttons" use (see
page 137), with the addition of 3 (three) more. These are:
Duration
! ! ! !
Start Time
! ! ! !
assign a "start" time (for when the banner is displayed).
Stop Time
! ! ! !
assign a "stop" time (for when the displayed banner closes).
When assigning images and times for banners, refer to:
page 139 and "Time Formats" on page
When finished, click on the
11.
button if you want to reset all the values to their previous state.
Reset
To return to the previous screen, click on the
12.
138
U
link.
Configure Banners
Click here to
return to the
previous screen
– Defines how long the banner is displayed in the ICC.
– This is an optional parameter that you set if you want to
– This is an optional parameter that you set if you want to
139.
button to save your changes, or click on the
Submit
S G
NIVERSAL UBSCRIBER
"Assigning Buttons" on
"Pixel Sizes" on
link.
Configure ICC
System Administration
™
ATEWAY