Nomadix Universal subscriber gateway User Manual page 62

If AAA passthrough is enabled, enter the corresponding port number.
7.
"
The port number must be different than 80, 2111, 1111, or 1112.
Enable or disable the
8.
license key must support this feature).
"
Support for 802.1x authentication requires both AAA and RADIUS
functions to be enabled.
When the USG is enabled with 802.1x, the USG becomes the authenticator in
the 802.1x enabled network. The USG's advanced security feature enables the
support of a wide variety of authentication methods within the network.
"
The USG contains advanced Dual Mode 802.1x/UAM functionality that
allows for the simultaneous use of both authentication methods without
any delay times. Go to
nomadix technical Support for more information.
Select the authorization mode you want to use:
9.
Internal Web Server
! ! ! !
External Web Server
! ! ! !
Depending on which authorization mode you choose, go to the following sub-
10.
sections in this procedure:
Enabling AAA Services with the Internal Web Server
! ! ! !
"flashed" into the system's memory and the subscriber's login page is served
directly from the USG. In this mode, the login page consists of a simple
request for the subscriber's ID (user name) and password.
Enabling AAA Services with an External Web Server
! ! ! !
mode, the USG redirects the subscriber's login request to an external server
(transparent to the subscriber). The login page served by the EWS reflects
the "look and feel" of the solution provider's network and presents more
login options.
58
U
NIVERSAL
802.1x Authentication Support
"Contact Information" on page 225
S G
UBSCRIBER ATEWAY
feature, as required (your
and contact
– The IWS is
– In the EWS
System Administration
™