Chapter 1: Installing The Usg - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER
Installing the USG
This chapter provides installation instructions for the hardware and software
components of the Universal Subscriber Gateway. It also includes an overview of the
management interface, some helpful hints for system administrators, and procedures
for the following tasks:
Powering up the system.
! ! ! !
Logging in to the management interface.
! ! ! !
Establishing the USG's start up configuration.
! ! ! !
Logging out and powering down the system (necessary before connecting
! ! ! !
the unit to the customer's network for the first time).
Connecting the USG to the customer's network.
! ! ! !
Establishing the basic configuration for subscribers.
! ! ! !
Archiving your configuration settings.
! ! ! !
Installing the Nomadix Enterprise MIB.
! ! ! !
"
Once you have installed your USG and established the configuration
settings, you should write the settings to an archive file. If you ever
experience problems with the system, your archived settings can be
restored at any time. See
page 51.
Universal Subscriber Gateway
Installing the USG
G ™
ATEWAY
"Archiving Your Configuration Settings" on
1
31