Importing The Factory Defaults {Factory - Nomadix Universal subscriber gateway User Manual

Importing the Factory Defaults {Factory}

This procedure shows you how to replace the current configuration settings with the
settings that were established at the factory.
"
If you restore the factory default configuration settings, you will no
longer be able to access the USG remotely. However, you always have
the option of using the "import" function to restore system
configuration settings from the archive file.
#
The factory default configuration does not include the network settings.
The network connection will be lost if this "import" function is
performed. To avoid a prolonged service interruption, perform this
procedure from the Command Line Interface via the serial port.
"
You will need to reboot the system for some of the imported default
settings to take effect (especially DHCP). See also,
Firmware {Upgrade}" on page
From the Web Management Interface, click on
1.
The Factory Configuration screen appears:
Click here to
view the
factory.txt file
Click on the
2. Submit and Reboot
configuration settings with the factory default settings and reboot the USG.
158
U S
NIVERSAL UBSCRIBER
167.
, then
System
Click here to
view the
current.txt file
button to replace the current system
G ™
ATEWAY
"Updating the USG
Factory.
System Administration