Establishing The Start Up Configuration - Nomadix AG 5000 User Manual

Establishing the Start Up Configuration

The CLI allows you to administer the AG 5000's start-up configuration settings.
When establishing the start-up configuration for a new installation, you
are connected to the AG 5000 via a direct serial connection (you do not
have remote access capability because the AG 5000 is not yet
configured or connected to a network). Once the installation is complete
(see "Installation Workflow" on page
configured, you will have the additional options of managing the AG
5000 remotely from the system's Web Management Interface, an SNMP
client manager of your choice, or a simple Telnet interface.
The start up configuration must be established before connecting the AG 5000 to a
customer's network. The "start up" configuration settings include:
Assigning a Login Name and Password –
user name and password that enables you to administer and manage the AG
5000 securely.
User names and passwords are case-sensitive.
Setting the SNMP Parameters –
Management Protocol) parameters must be established before you can use
an SNMP client (for example, HP OpenView) to manage and monitor the
AG 5000 remotely.
Enabling the Logging Options –
want to create system and AAA (billing) log files, and retrieve error
messages generated by the AG 5000.
Assigning the Network Interface IP Address –
address that allows administrators and subscribers to see the AG 5000 on the
network. Use this address when you need to make a network connection with
the AG 5000.
Assigning the Subscriber Interface IP Address –
that subscribers will see on the private side of the AG 5000.
Assigning the Subnet Mask –
addresses that are available on the routed subnet where the AG 5000 is
located.
Assigning the Default Gateway IP Address –
router that the AG 5000 uses to transmit data to the Internet.
44
37) and the system is successfully
You must assign a unique login
The SNMP (Simple Network
Servers must be assigned and set up if you
This is the public IP
This is the IP address
The subnet mask defines the number of IP
This is the IP address of the
Installing the AG 5000
AG 5000