Management Interface Error Messages - Nomadix Universal subscriber gateway User Manual

Management Interface Error Messages

The following table contains the error messages associated with the Management
Interface (CLI and Web). All messages are listed alphabetically.
Error Message
AAA must be enabled before adding a
subscriber to the profile database.
Command not available "bootimg.bin"
Command not available "xx"
Current settings were not archived.
Current settings were not changed.
Error loading factory settings.
Error occurred, ARP entry not added.
NFS client support not included.
No matching MAC address found in
profile database.
[not defined]
224
U S
NIVERSAL UBSCRIBER
Cause
You are attempting to add a subscriber
profile while AAA is disabled.
The system cannot find the new boot
image when attempting to upgrade the
system software. The image file must be
resident on the ftp/flash/ directory.
The system does not recognize your
command ("xx" denotes your input).
This message is displayed if you answer
"no" when prompted to overwrite the
configuration archive file with new
settings.
This is either a response to your decision
not to change settings, or the message is
generated by the system when it fails to
locate the data it needs.
The system cannot find the default
configuration file when attempting to
restore the factory settings.
The IP or MAC address is invalid. Ensure
that you input the correct format for these
fields.
This message is displayed when the
system reboots and NFS clients are not
supported.
The system could not match the MAC
address you defined while attempting to
remove a subscriber profile.
This is the factory default for some
system parameters.
G ™
ATEWAY
Troubleshooting