Managing The System And Billing Log Options {Logging - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER
When finished, you must reboot the system for the new settings to take effect.
7.
Click on the check box for
system after saving your changes.
Click on the
8. Submit
on the button if you want to reset all the values to their previous state.
Reset

Managing the System and Billing Log Options {Logging}

System logging creates log files and error messages generated at the system level.
AAA logging creates activity log files for the AAA (Authorization, Authentication,
and Accounting) functions. You can enable either of these options.
"
Although the AAA and billing logs can go to the same server, we
recommend that they have their own unique server ID number assigned
(between 0 and 7). When managing multiple properties, the properties
are identified in the log files by their IP addresses.
From the Web Management Interface, click on
1.
The Log Settings screen appears:
If required, click on the check box for
2.
When system logging is enabled, the standard SYSLOG protocol (UDP) is used
to send all message logs generated by the USG to the specified SYSLOG server.
Enter a unique number (between 0 and 7) in the
3.
ID number is assigned to the System Log Server.
Enter a valid IP address in the
4.
System Administration
G ™
ATEWAY
Reboot after changes are saved?
button to save your changes and reboot the system, or click
System Log
System Log Server IP
to reboot the
, then
Configuration Logging.
to enable system logging.
field. This
System Log Number
field.
77