Default (Factory) Configuration Settings - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER

Default (Factory) Configuration Settings

The following table shows a partial listing of the USG's primary default configuration
settings (the settings established at manufacturing). For a complete listing of the
factory default settings, refer to the
"Importing the Factory Defaults {Factory}" on page
Function
Version
USG ID
Network Interface MAC
Subscriber Interface MAC
Network Interface IP
Subscriber IP
Subnet Mask
Default Gateway IP
Domain
Host Name
Primary DNS
Secondary DNS
Tertiary DNS
DHCP Relay
External DHCP Server IP
DHCP Relay Agent IP
DHCP Server
DHCP Server IP
DHCP Subnet Mask
DHCP Pool Start IP
DHCP Pool End IP
Lease Duration Minutes
Home Page Redirection
Parameter Passing
Redirection Frequency Minutes
Home Page URL
Dynamic Address Translation (DAT)
AAA Logging
AAA Log Server Number
AAA Log Server IP
SYSLOG (System Logging)
SYSLOG Server Number
SYSLOG Server IP
Quick Reference Guide
G ™
ATEWAY
factory.txt
USG v3.07 (depends on current firmware version)
Serial number is unique for each product
MAC address is unique for each product
MAC address is unique for each product
http://usg.nomadix.com/usg/testclient/portal.asp
file. For more information, go to
158.
Default Setting
10.0.0.10
10.0.0.11
255.255.255.0
10.0.0.1
nomadix.
usg
0.0.0.0
0.0.0.0
0.0.0.0
Disabled
0.0.0.0
0.0.0.0
Enabled
10.0.0.4
255.255.255.0
10.0.0.12
10.0.0.250
1440
Disabled
Disabled
3600
Enabled (cannot be changed)
Disabled
152
0.0.0.0
Disabled
144
0.0.0.0
193