Nomadix Universal subscriber gateway User Manual page 89

U S
NIVERSAL UBSCRIBER
System administrators can set the properties for each room from the subscriber
2.
side of the USG. The system automatically detects which port number the
administrator is using and allows them to enter the fields for the room
corresponding to the port they are using.
If required, click on the check box for
feature.
If you enabled In Room Port Mapping, you must assign a
3.
. You will need these when you perform port mapping from the
Password
subscriber side of the USG.
Go to "In Room Port Mapping" on page 87
side of the USG.
#
For security reasons, this feature should be disabled when in room port
mapping (from the subscriber side of the USG) is completed.
Select
4. No Port Location Mapping
System (PMS).
... or go to Step 5:
Select
5. 802.1Q one-way
device that understands VLAN IDs. These options tell the USG that the device
can process VLAN IDs to identify which port-location the information is coming
from, and how to bill it.
"
When assigning port-locations, the "port" is the VLAN ID (when using
802.1Q one-way or 802.1Q two-way).
... or go to Step 6 (next page):
System Administration
G ™
ATEWAY
In Room Port Mapping
if you are not using a Property Management
or
802.1Q two-way
to enable this
Username
to map rooms from the subscriber
(VLAN IDs) if you are using a
and
85