Using A Telnet Client; Logging In; About Your Product License - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER
The following example shows a (partial) SNMP screen response.

Using a Telnet Client

There are many Telnet clients that you can use to connect with the USG. Using Telnet
provides a simple terminal emulation that allows you to see and interact with the
USG's Command Line Interface (as if you were connected via the serial interface).
As with any remote connection, the network interface IP address for the USG must be
established (you did this during the installation process).

Logging In

To access the USG's Web Management Interface, use the manager or operator login
user name and password you defined during the installation process (refer to
"Assigning Login User Names and Passwords" on page
"
User names and passwords are case-sensitive.

About Your Product License

Some features included in this chapter will not be available to you unless you have
purchased the appropriate product license from Nomadix. In this case, the following
statement will appear either immediately below the section heading or when the
feature is mentioned in the body text:
Your product license may not include this feature.
You can upgrade your product license at any time.
System Administration
G ™
ATEWAY
40).
55