Enabling The Logging Options (Recommended) - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER

Enabling the Logging Options (recommended)

System logging creates log files and error messages generated at the system level.
AAA logging creates activity log files for the AAA (Authentication, Authorization,
and Accounting) functions. You can enable either of these options.
"
Although the AAA and billing logs can go to the same server, we
recommend that they have their own unique server ID number assigned
(between 0 and 7). When managing multiple properties, the properties
are identified in the log files by their IP addresses.
When system logging is enabled, the standard SYSLOG protocol (UDP) is used to
send all message logs generated by the USG to the specified server.
Enter (logging) at the Configuration menu.
1. log
The system displays the current logging status (enabled or disabled).
Enable or disable the system and/or AAA logging options, as required.
2.
If you enable either option, go to Step 3, otherwise logging is disabled and you
can terminate this procedure.
Assign a valid ID number (0-7) to each server.
3.
Enter the IP addresses to identify the location of the system and AAA SYSLOG
4.
servers on the network (the default for both is 0.0.0.0).
When logging is enabled, log files and error messages are sent to these servers
for future retrieval. To see sample reports, go to
page 197 and "Sample AAA Log" on page
S S
AMPLE CREEN
Configuration>log
Enable/disable system logging
Enter system SYSLOG number (0-7) [0
Enter system SYSLOG server IP
Enable/disable AAA logging
Enter AAA SYSLOG number (0-7) [0
Enter AAA SYSLOG server IP
System logging
System SYSLOG number
System SYSLOG server IP
AAA logging
AAA SYSLOG number
AAA SYSLOG server IP
42
G ™
ATEWAY
R
ESPONSE
[disabled
[0.0.0.0
[disabled
[0.0.0.0
Enabled
1
8.9.10.11
Enabled
2
9.10.11.12
"Sample SYSLOG Report" on
196.
]: enable
]: 1
]: 8.9.10.11
]: enable
]: 2
]: 9.10.11.12
Installing the USG