Establishing Login Access Levels {Login - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER

Establishing Login Access Levels {Login}

This procedure shows you how to assign differentiated access levels for operators and
managers at login, and manager login control for remote RADIUS testing (if
RADIUS is enabled).
The USG allows you to define 2 concurrent access levels to differentiate between
managers and operators, where managers are permitted read/write access and
operators are restricted to read access only. Once the logins have been assigned,
managers have the ability to perform all write commands (Submit, Reset, Reboot,
Add, Delete, etc.), but operators cannot change any system settings. When this feature
is enabled, one manager and three operators can access the USG at any one time (the
default is "disabled"). This feature supports the following interfaces:
Telnet
! ! ! !
Command Line Interface (CLI) – serial
! ! ! !
Web Management Interface (WMI)
! ! ! !
FTP (no operator access allows)
! ! ! !
Only managers can assign a username and password for the remote RADIUS testing
login option.
From the Web Management Interface, click on
1.
The Login Name and Password screen appears:
System Administration
G ™
ATEWAY
, then
System Login.
161