Assigning Buttons - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER
You must now decide what you want the ICC to do if the subscriber closes it.
4.
The following options are available:
Redisplay itself
! ! ! !
Logout
! ! ! !
only (not recommended).
Select the "closing" action for the ICC.
#
RADIUS only – subscribers will lose their remaining session time if they
choose the "Logout" option and close the ICC.
You can now assign the buttons that you want to display to subscribers. To assign
5.
your buttons, go to

Assigning Buttons

You must now assign the redirect buttons that will appear in the ICC. You can
6.
define one
ISP Button
through
Button 9
Name/Text
! ! ! !
mouse-over text is the text that appears in the ICC's message bar when
your mouse pointer "rolls" over a button image.
Target URL
! ! ! !
Image Name
! ! ! !
button.
When assigning images for buttons, refer to:
When you have completed assigning all your redirect buttons, click on the
7.
button to save your changes, or click on the
Submit
reset all the values to their previous state.
You can now assign the banners that you want to display to subscribers.
8.
System Administration
G ™
ATEWAY
(return the subscriber to a "pending" state) – with RADIUS
"Assigning Buttons" on page
(large button) and up to 8 smaller buttons (
), with the following parameters:
– The name of the button and the mouse-over text. The
– Where subscribers are sent when they click on the button.
– The representative image file you want to use for the
137.
Button 2
"Pixel Sizes" on page 139.
button if you want to
Reset
137