Assigning A Pms Service {Pms - Nomadix Universal subscriber gateway User Manual

U S
NIVERSAL UBSCRIBER
In the
3. IP/DNS Name
you want to add or remove from the system.
"
The system only accepts route DNS names (for example,
www.nomadix.com). Do not include protocol, port, or path information.
If adding this pass-through, click on the
4.
to delete this pass-through from the list.

Assigning a PMS Service {PMS}

Your product license may not include this feature.
The USG can be integrated with existing Property Management Systems. For
example, by integrating with a hotel's PMS, the USG can post charges for Internet
access directly to a guest's hotel bill. In this case, the guest is billed only once. The
USG outputs a call accounting record to the PMS system whenever a subscriber
purchases Internet service and decides to post the charges to their room. The USG is
equipped with a dedicated PMS port to facilitate connectivity with a customer's
Property Management System. For the hospitality environment, the following
additional PMS protocols are available:
Fidelio, PTI, and Holodex
! ! ! !
"
Some Property Management Systems may require you to obtain a
license before integrating the PMS with the USG. Check with the PMS
vendor.
"
Some Property Management Systems may use interfaces that are
incompatible with the USG. If your USG is having trouble
communicating with a solution provider's PMS, please contact technical
support. Refer to
Before you can change the PMS settings, a PMS must be connected to the USG via
the dedicated PMS serial port on the rear panel. See also,
Customer's Network" on page
The USG can query most popular Property Management Systems for confirmation of
the "names" and "room numbers" of hotel guests—effectively becoming a "clone" of
a popular Micros POS system. This functionality allows hotels to seamlessly deploy
wireless networks (or alternatively use low-cost wired access concentration
equipment) that either do not support port-ID or do so in a proprietary format that
Nomadix does not currently support—and still be able to bill directly to the room.
System Administration
G ™
ATEWAY
field, enter the IP address or DNS name of the pass-through
Add
"Technical Support" on page
46.
button, otherwise click on
231.
"Connecting the USG to the
Remove
81