Management Interface Error Messages - Nomadix Access Gateways User Manual

Management Interface Error Messages

The following table contains the error messages associated with the Management Interface
(CLI and Web). All messages are listed alphabetically.
Error Message
AAA must be enabled before adding a
subscriber to the profile database.
Command not available "xx"
Current settings were not archived.
Current settings were not changed.
Error loading factory settings.
Error occurred, ARP entry not added.
NFS client support not included.
No matching MAC address found in profile
database.
[not defined]
The system must be reset to function properly.
The system must be rebooted to function
properly!
292
Cause
You are attempting to add a subscriber profile
while AAA is disabled.
The system does not recognize your
command ("xx" denotes your input).
This message is displayed if you answer "no"
when prompted to overwrite the configuration
archive file with new settings.
This is either a response to your decision not
to change settings, or the message is
generated by the system when it fails to locate
the data it needs.
The system cannot find the default
configuration file when attempting to restore
the factory settings.
The IP or MAC address is invalid. Ensure that
you input the correct format for these fields.
This message is displayed when the system
reboots and NFS clients are not supported.
The system could not match the MAC address
you defined while attempting to remove a
subscriber profile.
This is the factory default for some system
parameters.
You have made changes to the system's
configuration that requires you to reboot
before your changes become effective.
A G
CCESS ATEWAY
Troubleshooting