HP Jetdirect J7974E Administrator's Manual page 142

Table 8-12 Error Messages (continued)
Error Code and Message
24 PSERVER CLOSED
CONNECTION
25 DISCONNECTING - SPX
TIMEOUT
26 UNKNOWN NCP RETURN CODE The HP Jetdirect print server encountered an unexpected fatal error after it had
27 UNEXPECTED PSERVER DATA
RCVD
28 OUT OF BUFFERS
29 UNABLE TO SENSE NET
NUMBER
2A NDS ERR: EXCEEDS MAX
SERVERS
2B NDS ERR: UNABLE TO LOGIN
2C NDS AUTHENTICATION
ERROR
2D NDS ERR: CHANGE PSSWRD
FAILED
2E NDS SERVER PUBLIC KEY
ERROR
2F NDS ERR: SRVR NAME
UNRESOLVD
30 NDS PRINT SERVER NAME
ERROR
31 NDS PS PRINTER LIST ERROR
32 NDS PRINTER OBJ NOTIFY ERR The list of notification objects assigned to the printer object cannot be located.
33 NDS PRINT OBJ QUEUE LIST
ERR
34 NDS ERR: UNRESOLVD PRNTR
OBJ
132 Chapter 8 HP Jetdirect Configuration Pages
Description
PCONSOLE to make sure that servers are allowed to attach to the queue, to delete the
print server object from the list of queue servers if you want the HP Jetdirect print server
to service other queues, or to delete the queue and create a new one (the print server
object must be added to the list of queue servers).
When the HP Jetdirect print server is configured for multiple file servers, the error is only
displayed on the configuration page if none of the file servers made the connection.
The NetWare print server requested a termination of the connection with the HP
Jetdirect print server. No error exists or is indicated. Make sure the NetWare print server
is running, and restart it if necessary.
The SPX connection to the print server was lost after the connection had been made.
This indicates a possible network problem, or a problem with the print server. Make sure
all cables and routers are functioning correctly. Try restarting the print server.
successfully connected to the file server. A wide variety of failures could produce this
error message, including a downed file server or a network router failure.
The print server sent some data when the HP Jetdirect print server had not given its
permission to do so. This indicates a possible print server problem, possibly a software
problem.
The HP Jetdirect print server was unable to allocate a buffer from its internal memory.
This indicates all buffers are busy due possibly to heavy broadcast traffic or large
amounts of network traffic directed to the print server.
The HP Jetdirect print server has been trying for over 3 minutes to determine the
NetWare protocol used on the network. Make sure that any file servers and routers are
operating correctly. Make sure that the settings for NetWare frame type and source
routing are correct.
More queues were assigned than the HP Jetdirect print server can handle. Remove one
or more print queues from the list to be serviced by Queue Server Mode.
Unable to log onto the NetWare directory tree. Make sure that the print server object is
defined in the directory at the correct context. Clear the print server password using
NWADMIN or similar NetWare tool.
Unable to log onto the NetWare directory tree. Make sure that the print server object is
defined in the directory at the correct context.
Cannot modify the print server password to the value expected by the HP Jetdirect print
server.
Print Server Object Name mismatch. Unable to read the file server's public key. Verify
object names, or contact the NDS administrator.
The file server on the network cannot be located. The server may not be running at this
time or a communications problem may exist.
The HP Jetdirect print server object cannot be located in the specified NDS context.
Cannot locate a list of printers objects that should be assigned to the print server object.
The list of print queues assigned to the printer objects cannot be located.
The printer object cannot be located in the NDS directory.
ENWW