Firmware Upgrade; Lpd Queues - HP Jetdirect J7974E Administrator's Manual

Table 4-12 Miscellaneous Settings (continued)
Item
Bonjour Highest Priority Service

Firmware Upgrade

For print servers that support firmware upgrades, this page allows you to upgrade the print server with
new features.
The firmware upgrade file for the print server must be available on your system. To identify and retrieve
the appropriate upgrade file, visit HP online support at:
http://www.hp.com/go/webjetadmin_firmware
On that page, do the following:
1. Locate the print server model and the upgrade file.
2. Check the upgrade file version and verify that it is more recent than the print server's installed
version. If it is, then download the file. If not, then you do not need to upgrade.
To upgrade the print server using the embedded Web server:
1. Enter the path to the upgrade file or click Browse to locate it.
2. Then click Upgrade Firmware.

LPD Queues

The LPD Queues page allows you to specify LPD (line printer daemon) print queues on the Jetdirect
print server. For more information on LPD printing and print queues, see
LPD printing must be enabled on the print server before you can set LPD queues. If LPD is disabled,
go to the Misc. Settings
78 Chapter 4 HP Jetdirect Embedded Web Server (V.34.xx)
Description
Datagrams: In this field, enter port numbers of services that pass datagrams. Datagrams,
typically used for broadcast messages, use the User Datagram Protocol (UDP), a
connectionless protocol where delivery and error recovery are not guaranteed.
Specifies the Bonjour highest priority service to use for printing. To set this parameter,
choose one of the following printing options:
9100 Printing: Raw IP printing through HP-proprietary port 9100.
IPP Printing: Internet Printing Protocol printing.
LPD Printing (RAW): Default LPD raw queue printing.
LPD Printing (TEXT): Default LPD text queue printing.
LPD Printing (AUTO): Default LPD auto queue printing.
LPD Printing (BINPS): Default LPD binary PostScript queue printing.
LPD Printing (<user-defined>): Up to 5 user-specified LPD queues will be listed if they
have been configured, where <user-defined> is the name of the user-specified LPD print
queue.
The default selection will depend on the printer, typically 9100 Printing or LPD Printing
(BINPS).
tab to enable it.
LPD Printing.
ENWW