HP Jetdirect J7974E Administrator's Manual page 143

Table 8-12 Error Messages (continued)
Error Code and Message
35 NDS ERR: INVALID SRVR VERS The current version of the NetWare file server is not supported.
36 NDS ERR: NO PRINTER
OBJECTS
37 NDS ERR: MAX PRINT OBJECTS Too many printer objects are assigned to the print server object. Using NetWare utilities
38 NDS ERR: NO QUEUE OBJECTS No print queue objects are assigned to the printer objects located in the NDS directory.
39 NDS ERR: MAX QUEUE
OBJECTS
3A NDS ERR: UNABLE TO FIND
TREE
3B NDS CONNECTION STATE
ERROR
3C NDS ERR: UNRESOLVED
QUEUE
3D NDS ERR: CANNOT READ Q
HOST
3E NDS PRNT SRVR PUBLIC KEY
ERR
3F UNABLE TO GET NDS SRVR
ADDR
40 ARP DUPLICATE IP ADDRESS
41 NOVRAM ERROR
42 INVALID IP ADDRESS
43 INVALID SUBNET MASK
44 INVALID GATEWAY ADDRESS
45 INVALID SYSLOG ADDRESS
46 INVALID SERVER ADDRESS
47 INVALID TRAP DEST ADDRESS One of the SNMP trap (Trap PDU) destination IP addresses specified for the HP
48 CF ERR - FILE INCOMPLETE
49 CF ERR - LINE TOO LONG
ENWW
Description
No printer objects are assigned to the print server object configured to this HP Jetdirect
print server.
(such as NWADMIN), reduce the number of printer objects assigned to the print server.
Too many print queue objects are assigned to the printer. Reduce the number of queues
assigned.
The NDS tree cannot be located. The message may occur when the file server is not
running or when a network communications problem exists.
The HP Jetdirect print server cannot change the NDS connection state. Check licenses
on the spooling server.
The print queue object cannot be located in the specified NDS context.
Cannot locate the file server on the network. The server may not be running at this time
or a communications problem may exist.
Print Server Object Name mismatch. Unable to read the print server's public key. Verify
object names. Verify that the object key assigned to the HP Jetdirect print server is a
print server object and not a printer or other object.
The NDS server address cannot be located or accessed.
The ARP layer has detected another node on the network using the same IP address
as the HP Jetdirect print server. Extended error information below this message shows
the hardware address of the other node.
The HP Jetdirect print server cannot read the contents of its NOVRAM.
The IP address specified for the HP Jetdirect print server (through BOOTP) is an invalid
IP address for specifying a single node. Check your Bootptab file for proper entries.
The IP subnet mask specified for the HP Jetdirect print server (through BOOTP) is an
invalid subnet mask. Check your Bootptab file for proper entries.
The default gateway IP address specified for the HP Jetdirect print server (through
BOOTP) is an invalid IP address for specifying a single node. Check your Bootptab file
for proper entries.
The syslog server IP address specified for the HP Jetdirect print server (through
BOOTP) is an invalid IP address for specifying a single node. Check your Bootptab file
for proper entries.
The TFTP server IP address specified for the HP Jetdirect print server (through BOOTP)
is an invalid IP address for specifying a single node. Check your Bootptab file for proper
entries.
Jetdirect print server (through TFTP) is an invalid IP address for specifying a single
node. Check your TFTP configuration file.
The TFTP configuration file contained an incomplete last line that did not end in a
newline character.
A line being processed in the TFTP configuration file was longer than the HP Jetdirect
print server could accept.
HP Jetdirect Configuration Page 133