To Discontinue Dhcp Configuration - HP Jetdirect J7974E Administrator's Manual

4. In the Add New Scope Wizard, click Next.
5. Enter a Name and Description for this scope, then click Next.
6. Enter the range of IP addresses for this scope (beginning IP address and ending IP address). Also,
enter the subnet mask. then click Next.
NOTE
specifies the subnet and which portion specifies the client device.
7. If applicable, enter the range of IP addresses within the scope to be excluded by the server. Then
click Next.
8. Set the IP address lease duration for your DHCP clients. Then click Next.
HP recommends that all printers be assigned reserved IP addresses. This can be accomplished
after you set up the scope (see step 11).
9. Select No to configure DHCP options for this scope later. Then click Next.
To configure DHCP options now, select Yes and click Next.
a. If desired, specify the IP address of the router (or default gateway) to be used by clients. Then
click Next.
b. If desired, specify the Domain Name and DNS (Domain Name System) servers for clients.
Click Next.
c. If desired, specify WINS server names and IP addresses. Click Next.
d. Select Yes to activate the DHCP options now, and click Next.
10. You have successfully set up the DHCP scope on this server. Click Finish to close the wizard.
11. Configure your printer with a reserved IP address within the DHCP scope:
a. In the DHCP tree, open the folder for your scope and select Reservations.
b. Click the Action menu and select New Reservation.
c. Enter the appropriate information in each field, including the reserved IP address for your
printer. (Note: the MAC address for your HP Jetdirect-connected printer is available on the
HP Jetdirect configuration page.)
d. Under "Supported types", select DHCP only, then click Add. (Note: Selecting Both or BOOTP
only will result in a configuration through BOOTP due to the sequence in which HP Jetdirect
print servers initiate configuration protocol requests.)
e. Specify another reserved client, or click Close. The reserved clients added will be displayed
in the Reservations folder for this scope.
12. Close the DHCP manager utility.

To Discontinue DHCP Configuration

CAUTION
printer or system printing configurations for clients or servers.
ENWW
If subnetting is used, the subnet maskdefines which portion of an IP address
Changes to an IP address on your HP Jetdirect print server may require updates to
IPv4 Configuration 37