Sensor For Oil Temperature - Rotax 914 series Installation Manual

23.2) Sensor for oil temperature

See Fig. 91/92
- location: oil pump housing
- marking (2): marked with "TO" (temperature oil) on oil pump flange
■ CAUTION:
- position of the temperature sensor (1) on the oil pump flange:
- connection of sensor wiring: spade terminal 6,3 x 0,8 to DIN 46247
- grounding: via engine block
- graph of sensor resistance over temperature
■ CAUTION:
BRP-Rotax offers a non-certified temperature indicating instrument. Refer to Illustrated
Parts Catalog, latest issue.
▲ WARNING: Certification to the latest requirements such as FAR of EASA has to be
Effectivity: 914 Series
Edition 2 / Rev. 0
INSTALLATION MANUAL
To avoid any mix-up with indication wiring, mark this particular cable
also with "TO".
x axis
point of
mm
support
-115
The graph resistance over temperature has been determined, and is
effective at the following conditions only.
ambient temperature: 20 °C (68 °F)
tolerance:
conducted by the aircraft manufacturer.
1
TO
2
Fig. 91
00226
BRP-Rotax
Axes
y axis z axis
mm mm
46 -150
± 15%
(Ω)
1200
1000
800
600
400
200
0
20 40 60
04869
80 100 120 140 160
(°C)
Fig. 92
00227
page 134
July 01/2008