Electric System - Rotax 914 series Installation Manual

19) Electric system

See Fig. 69.
The engine is supplied with the wiring completed and ready to operate. Only the following
connections to the aircraft have to be established.
◆ NOTE:
- integrated generator
- external rectifier-regulator
- electronic modules
- electric starter
- start relay
- 2 electric fuel pumps
- TCU
- isolating switch for servo motor
- 2 lamps (boost- and warning lamp)
- items conditional for operation like circuit breakers, ON-OFF switches, control lamps,
relays, instrumentation and capacitors
Optional extras
- external alternator (as option if the output of the integrated generator is inadequate)
- electric tachometer (accessory)
- appliance (battery) not supplied by BRP-Rotax
Effectivity: 914 Series
Edition 2 / Rev. 0
BRP-Rotax
INSTALLATION MANUAL
Throughout this documentation as name for the "electrical load pressure
control" TCU stands for Turbo Control Unit.
page 107
July 01/2008