Sensor For Oil Temperature - Rotax 914 F Installation Manual

23.2) Sensor for oil temperature:

See Ill. 73/74
location: oil pump housing
marking W: marked with "TO" on oil pump flange
TO
position of the temperature sensor Q on the oil pump flange:
point of
support
connection of
sensor wiring: plug for socket 6,3 x 0,8 to DIN 46247
grounding:
graph of sensor resistance over temperature
(Ω) ohm
1200
1000
800
600
400
200
0
ATTENTION: The graph resistance over temperature has been determined, and
BOMBARDIER-ROTAX offers a non-certified temperature indicating instrument.
Refer to current spare parts list.
WARNING: Certification to the latest requirements such as FAR of JAR has to be
Date
Page
1996 05 10
94
1
To avoid any mix-up with indication wiring, mark this
particular cable also with "TO".
2
A x e s
x axis y axis
- 1 1 5
via engine block
20 40 60 80 100
is effective at the following conditions only.
ambient temperature:
tolerance:
conducted by the aircraft builder.
Install
914 F
ATTENTION:
Ill. 73
z axis
4 6 - 1 5 0
(°C)
120 140 160
20° C (68° F)
± 10%
Reference
Ill. 74
Modification-No.
- 0 -