Protective Covering - Rotax 914 series Installation Manual

9.4)

Protective covering

All openings are protected against ingress of contamination and dampness. It is
recommended not to remove these plugs until installation of the specific feed line.
◆ NOTE:
List of protective covering:
- exhaust socket: ............................................. 1x cone plug
- air intake socket on turbo: ............................ 1x cover
- connection for manifold pressure: ................. 1x cap
- fuel pressure control (in-and outlet): ............. 1x each cap
- oil supply and oil discharge: .......................... 1x each cap
- oil return (turbo): ........................................... 1x cap
- supply and discharge of coolant: .................. 1x each cone plug
- propshaft on configuration 3: ........................ 1x disk plug or cap
- airbox: ........................................................... 2x cap
▲ WARNING: Protective covering to be utilized for transport and at engine installation
Effectivity: 914 Series
Edition 2 / Rev. 0
BRP-Rotax
INSTALLATION MANUAL
If the engine will be sent to the manufacturer or distributor reuse
transport equipment and replug openings.
only. Before engine operation remove these protections.
page 32
July 01/2008