Rotax 914 series Installation Manual page 56

- Unscrew cap (2) from the overflow bottle.
- Bore the existing vent hole from dia. 2.5 mm (0.1 in.) to dia. 6 mm (0.236 in.)
- Apply LOCTITE
- Insert nipple (3) into the vent hole.
- Install nut (1) onto the hose nipple (3). Tightening torque 5 Nm (44 in lb).
- Screw the cap onto the overflow bottle.
Steps to attach the hose:
- Attach the hose with a Jubilee hose clamp (4) or with a spring type hose clip.
- Make sure the hose (5) has no kinks. Route it overboard and secure.
05294
Fig. 24
Effectivity: 914 Series
Edition 2 / Rev. 0
INSTALLATION MANUAL
603 to the threads of the hose nipple (3).
®
Ø 6mm (0. 236 in)
2
11,5mm
(0.453 in)
4
05033
Fig. 26
1 2 3
BRP-Rotax
1
5
05039
Fig. 27
3
LOCTITE 603
®
2
05295
Fig. 25
page 56
July 01/2008