21.2) Sensor for oil temperature
See Fig. 86 and 87
-
location: oil pump housing
-
marking (2): marked with "TO" (temperature oil) on oil pump flange
■ CAUTION:
-
position of the temperature sensor (1) on the oil pump flange:
-
connection of sensor wiring: spade terminal 6,3 x 0,8 to DIN 46247
-
grounding: via engine block
-
graph of sensor resistance over temperature
■ CAUTION:
BRP-Rotax offers a non-certified temperature indicating instrument. Refer to
Illustrated Parts Catalog, latest issue.
▲ WARNING: Certification to the latest requirements such as FAR of EASA
Effectivity: 912 Series
Edition 1 / Rev. 0
INSTALLATION MANUAL
To avoid any mix-up with indication wiring, mark this particular cable
also with "TO".
point of
support
The graph resistance over temperature has been determined,
and is effective at the following conditions only.
ambient temperature: 20 °C (68 °F)
tolerance:
has to be conducted by the aircraft manufacturer.
1
TO
2
Fig. 86
00226
BRP-Rotax
Axes
x axis
y axis
z axis
mm
mm
-115
46
± 10%
(Ω)
1200
1000
800
600
400
200
0
20
40
60
mm
-150
04869
80
100
120
140 160
(°C)
May 01/2007
Fig. 87
00227
page 128