Bios Setup Utility; Starting And Exiting The Bios Setup Utility - Fujitsu Primergy RX100 S3 User Manual

Chapter 8 Configuring Hardware and Utilities

8.1 BIOS Setup Utility

This section explains settings for the BIOS Setup Utility and items regarding each
setting.

8.1.1 Starting and Exiting the BIOS Setup Utility

The following explains how to start and exit the BIOS Setup Utility.
■ How to Start the BIOS Setup Utility
1
Turn the server on.
"1.4.2 Turning On the Server" (pg.31)
2
During POST, press the [F2] key while the message "<F2>BIOS Setup / <F12>
BOOT Menu" is displayed on the screen.
The [Main menu] window appears when the POST completes.
Main
System Time:
System Date:
Standard IDE:
Boot Options
Base Memory:
Extended Memory:
Help
F1
Esc Exit
When the [Main menu] window does not appear
202
Advanced Security
[HH:MM:SS]
[MM/DD/YYYY]
[GCR-8483B-(PM)]
640K
***M
-/+
Select Item
Select Menu Enter
When the [Main menu] window does not appear because the [F2] is pressed at wrong timing,
press the [Ctrl] + [Alt] + [Delete] keys at the same time to restart the system, then start the
BIOS Setup Utility.
Server Exit
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Change Values
Setup Defaults
F9
Previous Values
Select Sub-Menu F7