Configuring Ddns; Resetting Nokia Ip40 Security Platform To Factory Defaults - Nokia IP40 User Manual

12
Configuring Device Functions
The Dynamic Domain Name Server (DDNS) feature on Nokia IP40 updates the ISP-provided IP
address to the DNS located at the headquarters. The DDNS feature works with DNS supporting
BIND-8.2.x, BIND-9.x, and Windows DNS.

Configuring DDNS

You can configure DDNS through the CLI.
Note
Before you configure DDNS, make sure your DNS is configured.
Use the following command to configure DDNS:
set ddns <server | client >
Use the following command to add DDNS:
add ddns server < ip address >
For more information about DDNS commands, see Nokia IP40 Security Platform CLI Reference
Guide, Version 1.1.
Resetting Nokia IP40 Security Platform to Factory
Defaults
You can reset Nokia IP40 to its default settings. When you reset your IP40, it reverts to the state
it was originally in when you purchased it, and your firmware reverts to the version that shipped
with the device.
Caution
Resetting to factory defaults erases all of your settings and password information. You
must set a new password and reconfigure your IP40 for Internet connection.
You can reset IP40 to defaults through the Web management interface (software) or by manually
pressing the Reset button (hardware) located at the back of the device.
To reset IP40 Security Platform to factory defaults through the Web interface
1. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
2. Click Factory Settings.
A confirmation message appears.
150 Nokia IP40 Security Platform User's Guide v1.1