Ribbon Type Selection Mode - TEC CB-416 Series Maintenance Manual

5. DIAG. TEST OPERATION
5.3.8

Ribbon Type Selection Mode

Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1 > D I A G .
Press the [FEED] key.
< 2 > P A R A M E T E R
Press the [PAUSE] key.
P O S
Press the [FEED] key seven times.
R I B
Press the [PAUSE] key.
¥CB-416
B L A
Select the ribbon type with
the [FEED] or [RESTART] key.
Press the [PAUSE] key.
Press the [FEED] key
and [RESTART] key
at same time.
Press the [PAUSE] key.
NOTES: 1. Changed settings are stored in the memory by pressing the [PAUSE] key.
2. Ribbon types can be mixed.
3. Ribbon type can be selected by the ribbon type selection command from the PC.
Power off
V 1 . O A
S E T
I T I O N
B O N
C K
MAGENTA
CYAN
YELLOW
Repeat the above
procedure to other
print heads.
Ribbon type selection disply
F 1
H A
F1 : Standard ribbon
(CR-30xxx-F1)
Select the ribbon type with
P1S : Super premium
the [FEED] or [RESTART] key.
ribbon
(CR-30xxx-P1S)
Press the [FEED] key
and [RESTART] key
at same time.
5-40
(Revision Date: Dec. 20, 2000)
5.3 PARAMETER SETTING MODE
¥CB-426
E D 1
Press the [PAUSE] key.
HEAD2
Repeat the above
procedure to 2nd
print head.
Press the [PAUSE] key.
EO18-33002A
F 1
F1 : Standard ribbon
(CR-30xxx-F1)
P1S : Super premium
ribbon
(CR-30xxx-P1S)