TEC CB-416 Series Maintenance Manual page 47

5. DIAG. TEST OPERATION
X-coordinate Fine Adjustment Example
To down printing
+0.0 mm
-50.0 mm
+50.0 mm
NOTES: 4. The X-coordinate fine adjustment is performed to fine adjust the X-coordinate of
5. Adjust the X-coordinate in the effective print range. (After the value reaches the
6. X-coordinate fine adjustment cannot be used in self test mode or test printing.
X
Y
-50.0 mm
ABC
+ 50.0 mm
the drawing in the left or right direction.
coordinate "0", the value remains unchanged even if the subsequent fine adjustment
is performed in the negative direction.)
Feed direction
ABC
X
ABC
5-19
5.3 PARAMETER SETTING MODE
Fig. 5-12
Y
Bottom first printing
Fig. 5-13
Fig. 5-14
EO18-33002A