TEC CB-416 Series Maintenance Manual page 53

5. DIAG. TEST OPERATION
Adjustment example (CB-416)
X-direction fine adjustment method is explained using magenta.
Cyan
Magenta
Yellow
Cyan
Magenta
Yellow
1) Check where magenta belongs among rows E~H within the portion 1.
2) In this example, magenta is printed on the row F. When magenta is printed on the row E or F,
refer to the upper print sample.
When row G or H, refer to the lower print sample.
3) Check where a magenta aligns with the black line (indicated by
(indicated by 3).
4) Enter the alpha-numerics obtained in steps 1) through 3) into the Head Adjust display. In this case,
enter F7.
5) The values for cyan and yellow are obtained in the same way.
These lines indicate Y-direction
alignment.
(When they align and form an almost
straight line, the adjustment is
completed.)
Feed
Magenta
X-direction misalignment
E and F : + (plus) direction
G and H : - (minus) direction
5-25
5.3 PARAMETER SETTING MODE
2 ). Read the scale of the position
EO18-33002A