Transmission Control Mode Selection - TEC B-450 SERIES User Manual

6. DIAG. TEST OPERATION
6.3.9

Transmission Control Mode Selection

Press the [C] key.
NOTES: 1. Holding the [ ↓ ] key or [ ↑] key down for more than 0.5 seconds enables a fast forward.
2. A changed transmission control mode is stored in keyboard memory by pressing the
[ → ] key.
Power off
Turn on the power while
holding down the [SHIFT]
key .
< 1 >
D I A G .
Press the [↓] key.
< 2 >
P A R A M E T E R
Press the [→] key nine times.
X O N + R E A D Y
Select Transmission Control
Mode Selection with the
[↓] key or [↑]
key. (See NOTE 1.)
Press the [ENTER] key.
S E T T O P R I N
Y E S : [ E N T ]
Press the [ENTER] key or [C] key.
•
XON/XOFF AUTO: XON/XOFF mode
(XON at power on, XOFF at power off)
S E T
•
XON+READY AUTO: XON/XOFF+READY/
BUSY (DTR) mode
(XON at power on, XOFF at power off)
•
READY/BUSY: READY/BUSY
(DTR) mode (No XON at power on nor
XOFF at power off)
A U T O
•
XON/XOFF: XON/XOFF mode
(No XON at power on nor XOFF at power
off)
•
READY/BUSY RTS: READY/BUSY (RTS)
mode (No XON at power on nor XOFF at
power off)
Press the [→] key.
T E R ?
Continued on Section 6.3.10
N O : [ C ]
Control Code Selection.
6-26
EO18-33003A
6.3 PARAMETER SETTING MODE