Basic Setting; Basic Specification Selection Mode - TEC SX4T - B B/W Direct Thermal User Manual

5. SYSTEM MODE

5.10 BASIC SETTING

T
Outline of Basic Setting
Setting the BASIC specification and Trace specification to be enabled/disabled, and displaying the
program file, data file, and area file are available in this mode.
The Basic Setting menu contains the following.
While pressing the [FEED] and [PAUSE] keys at the same time, turn on the printer. Hold both keys
until the "<1>DIAG. Vx.x" Message appears.
Press the [FEED] key 8 times.
The printer is at the start of the BASIC setting menu.
When "<8>BASIC" appears, press the [PAUSE] key.

5.10.1 Basic Specification Selection Mode

Select whether the Basic specification is enable or not.
[PAUSE]
[RESTART]
[FEED]
[PAUSE]
[PAUSE]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
"BASIC ON" or "BASIC OFF" is selected each time the
[RESTART] or [FEED] key is pressed.
Basic specification selection is completed by pressing the
[PAUSE] key.
5-61
BASIC Specification Selection Mode
BASIC File Browser
BASIC Trace Selection Mode
EO18-33012A
5.10 BASIC SETTING