TEC CB-416 Series Maintenance Manual page 32

5. DIAG. TEST OPERATION
(3) EEPROM Backup Check
EEPROM BACK UP
(4) SIMM Check
SIMM CHECK
NOTE: If an error is detected during SIMM check, the display of readable/writable area will stop
when the error occurs.
(5) SIMM Memory Capacity Check
MEMORY (SIMM)
(6) Environmental temperature check
OPEN-AIR TEMPERATURE SENSOR :
(7) PSU temperature check
Thermal sensor 2
PSU TEMPERATURE SENSOR :
OK
EEPROM: Backup memory
OK
OK: Data in the memory is readable/writable.
NG: Some data in the memory is not readable/writable
SIMM: Image buffer memory or work memory
16MB (SLOT1: 16MB, SLOT2: 0MB)
Total memory
Image buffer memory or work memory
Read/write check
OK: Data in the check area can be properly
read/written.
NG: Data in the check area cannot be
properly read/written.
SIMM capacity on SLOT2
SIMM capacity on SLOT1
B2
Environmental temperature (A/D value)
7F
PSU temperature (A/D value)
5-4
EO18-33002A
(Revision Date: Apr. 20, '99)
5.2 SELF TEST MODE