5. DIAG. TEST OPERATION
5.3.7
Color Designation Mode
Select use or non use of each print head using the following procedure.
< 1
< 2
P O
Press the [FEED] key six time.
H E
¥CB-416
B L
Select use or non use of each
print head with the [FEED] or
[RESTART] key.
Press the [FEED] key
and [RESTART] key
at the same time.
NOTE:
Changed settings are stored in the memory by pressing the [PAUSE] key.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
>
D I A G .
V 1 . O A
Press the [FEED] key.
>
P A R A M E T E R
Press the [PAUSE] key.
S
I T I O N
A
D
S E L E C T
Press [PAUSE] key.
A
C K
Press the [PAUSE] key.
MAGENTA
CYAN
YELLOW
Repeat the above
procedure to other
print heads.
Press the [PAUSE] key.
S E T
Color designation display
O N
ON : Use
OFF : Not use
Press the [FEED] key
and [RESTART] key
at the same time.
5-39
(Revision Date: Dec. 20, 2000)
5.3 PARAMETER SETTING MODE
¥CB-426
H E
A
D 1
Select use or non use of each
print head with the [FEED] or
[RESTART] key.
Press the [PAUSE] key.
HEAD2
Repeat the above
procedure to 2nd
print head.
Press the [PAUSE] key.
EO18-33002A
O N
ON : Use
OFF : Not use