And Y-Directions Fine Adjustment Mode; Setting Conditions For Adjustment Value Confirmation Print - TEC CB-416 Series Maintenance Manual

5. DIAG. TEST OPERATION
5.3.3 X and Y-Directions Fine Adjustment Mode

5.3.3.1 Setting Conditions for Adjustment Value Confirmation Print

Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1 > D I A G .
Press the [FEED] key.
< 2 > P A R A M E T E R
Press the [PAUSE] key.
P O S I T I O N
Press the [FEED] key twice.
H E A D
Press [PAUSE] key.
P R I N T
Press [PAUSE] key.
Set the print
I S S U E
count
Set the number of labels to
[FEED] or [PAUSE] key.
Press the [FEED]
Press the [PAUSE] key.
and [RESTART] keys
at the same time.
Set the print
P R I N T
speed
Set print speed with the
[FEED] or [PAUSE] key.
Set the sensor
S E N S O R
type
Set the sensor type with the [FEED]
Set the media
B A C K
back feeding
Select use or non use of reverse
feed with the [FEED] or [PAUSE] key.
Power off
V 1 . O A
S E T
A D J U S T
C O N D I T I O N
C O U N T
be printed with the
S P E E D 6 " / S
T R A N S .
or [PAUSE] key.
F E E D Y E S
5-21
5.3 PARAMETER SETTING MODE
X and Y-directions fine
adjustment display
Print parameter setting mode
10 (Print count 10)
5
1 (Print count 1)
6" / sec.
4" / sec.
NONE
(consecutive form)
REFLECTIVE
(black mark sensor)
TRANSMISSIVE
(feed gap sensor)
With reverse feed
Without reverse feed
EO18-33002A