5. DIAG. TEST OPERATION
5.3.10 Resolution Selection
Using the following procedure, the resolution can be selected between Normal Mode and Fine
Mode.
Press the [FEED] key or [RESTART] key to
resolution of printer.
Press the [FEED] key or [RESTART] key
at the same time
NOTES:
1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds
2. A changed setting is stored in memory by pressing the [PAUSE] key.
3. If the Fine Mode is selected without using the printer driver exclusively for the fine
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1
>
D I A G .
Press the [FEED] key.
< 2
>
P A R A M E T E R
Press the [PAUSE] key.
P O
S
I T I O N
Press the [FEED] nine times.
R E
S
O L U T I O N
Press the [PAUSE] key .
N O
R
M A L
M O D E
enables a fast forward.
mode, print could be shrunk in the vertical direction.
V 1 . O A
S E T
Resolution selection display
Resolution selection display
NORMAL MODE: 305 X 305 dpi
FINE MODE: 305 X 610 dpi
Press the [PAUSE] key .
5-42
EO18-33002A
(Revision Date: Dec. 20, 2000)
5.3 PARAMETER SETTING MODE