TEC CB-416 Series Maintenance Manual page 76

5. DIAG. TEST OPERATION
7. When an error occurs during a test print, the error message is displayed and
8. When "AUTO PRINT" is selected, 3 pcs. of the slant line labels, color bar print
9. Changed parameter settings are effective by pressing the [PAUSE] key until the
10. Fine adjustment values are effective to test print.
Test Print Sample
• Slant line
• Color bar print (CB-416)
• Color bar print (CB-426)
printing is stopped. The error is cleared by pressing the [PAUSE] key and the
display shows "<3> TEST PRINT". Printing is not automatically resumed after the
error is cleared.
labels and character labels are printed respectively after one label is fed.
power is turned off.
• Charactor
• Bar code
5-48
EO18-33002A
5.4 TEST PRINT MODE